EN

ECOKRAFT Pellet Mill LP

Modular, Mobile, Intelligent

The innovative, process-controlled LP22 pellet mill for the production of premium-quality biomass pellets "Made in Germany" impresses with its flexibility, ease of operation, and product quality.

Highlights:

  • Zentralsteuerung der gesamten Pelletierlinie
  • Materialhomogenisierung und Metallabscheidung mittels Magneten
  • Konisches Kollerset für mehr Durchsatz und weniger Verschleiß
  • Materialwechsel in nur 5 bis 10 Minuten möglich
  • Geringer Strombedarf (Anschluss und Verbrauch)
  • GSM Fehlermeldung und Fernwartung
  • einfachste Bedienung und Wartung
  • modular ausbaubar
  • mobil

Inquiry form

Download Spec Sheet ECOKRAFT LP (E)

 

Display

The display is the control center for the complete pelleting line


- Overview of the complete pelleting line
- Individual adjustment of all modules
- Fine dosing of the water addition
- Determination of lubrication intervals (central lubrication)
- Shutdown of all modules in case of malfunction
- Fault and error diagnosis with message to cell phone with GSM possible
- Remote maintenance module

Material hopper

- Material homogenization of material density
- Magnetic separator for the removal of metallic foreign bodies

Conical pan grinder set 4.0

- Optimum material distribution on the die
- Gentler further processing of the material
- More throughput with the same energy input (compared to normal collator set)
- Cold pelleting (pressing) at below 50 degrees for sensitive materials (e.g. hops) possible
- For smoother running
- Less wear
- Automatic emptying function of the pressing chamber at production change or end

Flat die

- With individual chambers for pre-compaction
- 3 mm to 16 mm pellet diameter possible
- Quick and easy replacement possible in 15 minutes when changing material

Other advantages

ABSCHLÄGER
- Individually adjustable pellet length from 0.5 to 5 cm

CENTRAL LUBRICATION
- Supply of 4 lubrication points via interval control

DIE STORAGE
- Up to 2 spare dies can be stored directly in the LP22

INTERFACES
- Up to 3 additional modules (material bunker, conveyor belt and screening system) can be connected to the pellet mill and centrally controlled

MODULAR
- Can be expanded from a single pellet mill to a fully automated pelleting line

MOBIL
- All modules can be transported very easily and quickly

 
  LP22
Weight 850 kg
max. Power max. 24 kW
Connected load 63 A
Supply voltage 400 V AC 3PH, N, PE
Mains frequency 50 Hz
max. short-circuit current I 10 kA
Control voltage 24 V DC
IP degree of protection Control cabinet IP 54 machine IP 44
Length 1550
Width 700
Height 1590

* Product image similar; changes possible at any time. Acceptance by ECOKRAFT AG is valid.

Go back

© 2022 ECOKRAFT AG | All rights reserved | Imprint  | Data protection | Contact